Wednesday, October 26

15mm SCI-FI Airbrushing in Progress.


15mm SCI-FI Work in Progress. 1-100th
Originally uploaded by inrepose

Early stages with these models after airbrushing. Lots of work to do to get them highlighted, washed and weathered.

I am using the Vallejo Model air paints with these models and an Iwata HP-C Plus airbrush + compressor. This is my extractor airbrush booth which has a small turntable and sucks spair paint out of my hobby room via a tube I stick out of the window.   I still wear a mask and goggles to keep the stuff out of my lungs.


Masking tape is Tamiya which is randomly cut up and stuck down. I started with a dark green base layer, then started masking before spraying with a lighter green. Finally I layered on some more tape before airbrushing a final brown layer on these 15mm scale SCI-FI mecha and tanks from GZG.


3 comments:

  1. G'Day, I am looking into getting an airbrush/compressor. What kind of compressor do you use? More importantly why did you choose it?

    ReplyDelete
  2. Paging Mr Nihilist . . . . Paging Mr Nihilist . . . . Paging Mr Nihilist . . . .

    ReplyDelete
  3. Iwata HP-C Plus is my airbrush. Selected because everyone else said it was great. You can see it in use here: http://www.youtube.com/user/ScaleModelMedic#p/u/20/mRUlAr2ehWM

    I bought my compressor from a local hobbycraft store and it is not branded. It was in the £150 price bracket. I would suggest you buy something more than the most basic compressors which are not good at sustaining the pressure.

    ReplyDelete

Thanks for taking the time to comment on the blog! Robin